Rearview camera and monitor – Acura 2010 TL User Manual
Page 444
For the best picture, always keep the
rearview camera clean, and do not
cover the camera lens. To avoid
scratching the lens when you clean it,
use a moist, soft cloth.
Whenever you shift to reverse (R)
with your vehicle in the ON mode,
the rearview is shown on the
navigation system screen.
Since the rearview camera display
area is limited, you should always
back up slowly and carefully, and
look behind you for obstacles.
You can adjust the brightness of the
rearview camera image by turning
the interface dial.
Parking guidelines are also included
on the screen.
If the engine has just been started, it
may take a short time for them to
display.
On models with navigation system
Rearview Camera and Monitor
Fe
a
tu
re
s
441
REARVIEW
CAMERA
The camera brightness cannot be
adjusted by voice control.
09/07/29 18:11:30 31TK4610_446
2010 TL