Acura 2010 TL - Manual (Page 505)

This message is displayed again
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing the 0% message.
Immediately have the service
performed, and make sure to reset
the display as described on page
.
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
All maintenance items shown on the
multi-information display are in code.
For an explanation of these
maintenance codes, see page
.
When you press the SEL/RESET
button to select the engine oil life,
the message ‘‘SERVICE,’’ along with
the maintenance item code(s) and
the total negative distance traveled
after the oil life became 0%, will be
displayed on the multi-information
display.
501
506
Maintenance Minder
Maintenance Main Items and Sub
Items
502
U.S.
CANADA
MAINTENANCE
MAIN ITEM
MAINTENANCE
SUB ITEMS MAINTENANCE
MAIN ITEM
MAINTENANCE
SUB ITEMS
TOTAL PAST DUE DISTANCE
TRAVELED
09/07/29 18:27:10 31TK4610_507
2010 TL