Acura 2009 RDX Navigation - Manual (Page 83)

Navigation System 83
System Setup
Set up Mode
The Set up function consists of two
main screens that allow you to change
and update information in the system.
To display the Set up screen (first), use
the voice control system and say “Set
up” or press the SETUP button. To
change it to the Set up screen (second),
say or select MORE in the upper right
corner of the screen.
You can use the voice control system to
select any item on the Set up screen.
NOTE:
• If some items appear to be grayed out
and cannot be selected, it is because
you did not select
OK on the initial
Disclaimer screen. See System Start-
up on page
17 .
• For information on the available
voice commands, see Voice
Command Index on page
153 .
Set up Screen (first)
From any screen, say “Set up screen” or
press the SETUP button, and the
following screen appears:
Brightness
The screen brightness has 11 settings.
To change the brightness, use the voice
control system and say “Brightness up”
or “Brightness down.” You can also
select Brightness and change the
setting by rotating the Interface Dial
knob.
Tip:
If you are having trouble viewing the
screen in bright lighting conditions, try
increasing the brightness.
Contrast
The screen contrast has 11 settings. To
adjust the contrast, use the voice control
system and say “Contrast up” or
“Contrast down.” You can also select
Contrast and change the setting by
rotating the Interface Dial knob.
Black Level
The screen black level has 11 settings.
To change the black level, use the voice
control system and say “Black level up”
or “Black level down.” You can also
select Black Level and change the
setting by rotating the Interface Dial
knob.
NOTE:
You can have separate daytime and
nighttime settings for Brightness,
Contrast, and Black Level. Adjust each
setting when the display is in either
daytime or nighttime mode. Use the
Display Mode button
(page 11
and 104 ) to select Daytime or Nighttime
mode.
2009 RDX
Main Menu