Acura 2009 RDX Navigation - Manual (Page 137)

Navigation System 137
Frequently Asked Questions
While I drive, my screen shows white dots (“breadcrumbs”)
on it. What do they mean? These are called “breadcrumbs.” If you drive more than 1/2 mile from
mapped roads, the off-road tracking feature begins to function. see Off-road
Tracking on pages
67 and 101.
How can I get rid of the white dots (“breadcrumbs”) from my
screen? Go to “Vehicle” in the Set up screen (second), and set Off-road Tracking
to OFF, then return to the map. See page
101 .
A road that I selected to avoid is being used when routing.
What is wrong? When you “draw” your area to avoid, make sure to select sections of roads
that include at least one intersection. See page
96 .
When I arrive at my destination, the bull’s-eye is shown at a
different location on the street. Why? The system calculates the bull’s-eye location based on the street address
range allocated for that street. See Destination Icon on page
61 for an
example.
My elevation (shown when I display the current position)
seems to fluctuate even though my elevation has not changed. This is normal and due to errors in satellite position. The elevation can vary
+/- 100 feet. See System Limitations on page
110 .
My elevation is missing on the “current position” screen.
Why? If the GPS antenna cannot receive at least four satellites, the elevation is not
displayed. Try moving the vehicle into an open area. If the elevation is zero
or below sea level, the elevation is also not displayed.
Problem Solution
2009 RDX
Main Menu