Acura 2012 RDX Navigation - Manual (Page 78)

Navigation System 77
2RW_ACURA_RDX KA 31STK830
Driving to Your Destination
When the Select a place screen is
displayed, select an item from the list,
and the
Calculate route to screen is
displayed. Then select OK and push in
on the Interface Dial. You can select
either Set as New Destination or
Set as Waypoint for your specified
position.
When the pop-up menu is displayed,
select Set as Dest. to set your location
as a replacement destination, or Set as
Waypoint to set as a waypoint.
The system will return to the map
screen and recalculate the route to your
new destination or waypoint.
NOTE:
When you scroll through the
map
screen while en route to a destination,
some voice controls will not function.
These include:
• Display “Heading up”
• Display “North up”
Entering a Destination from the
Menu Screen (while en route)
If you say “Menu,” or press the MENU
button and select the “Enter destination
by” tab, the system displays the
MENU
screen ( Enter destination by ). Follow
the procedure described in Entering a
Destination, which begins on page 27.
When the Calculate route to screen is
displayed, select OK and push in on the
Interface Dial. You can select either
Set as New Destination or Set as
Waypoint for your specified position.
When the pop-up menu is displayed,
select Set as Dest. to set your location
as a replacement destination, or Set as
Waypoint to set as a waypoint.
The system will return to the map
screen, and recalculate the route to your
specified new destination or waypoint.
Tip:
You can also press the MENU button
twice to display the
MENU screen
( Enter destination by ).
00 2RW_ACURA_RDX_KA.book 77 ページ ２０１１年７月４日 月曜日 午後３時１３分