System setup – Acura 2012 RDX Navigation User Manual
Page 115

114 Navigation System
2RW_ACURA_RDX KA 31STK830
System Setup
Switching Display Mode Automatically
I
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see your Owner’s Manual for location of knob).
• On the SETUP Color adjustment screen, choose white for the map Day display and black for the map Night display (see
page 113). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
NOTE:
See your Owner’s Manual for additional information regarding the dash brightness adjustment.
llumination control
Priority Operation
But remember
Display Mode button
(see page 11)
1
Allows selection of Day, Night, or Off display mode.
Press this button to display the Brightness control.
When the Brightness control is displayed, pressing
this button switches to the Day, Night, or Off display
mode.
This button has the highest priority for the display
control adjustments.
—
Dash illumination adjustment
knob (see your Owner’s
Manual for location)
2
When headlights are turned on, and you wish to have
the Day display mode, then adjust the illumination to
the full bright setting (beeps).
Adjust the dash brightness back to mid-
range to allow auto switching by sensing
the headlights are on or off.
Headlights (Auto/On/Off)
3
When turned on (or off), the display changes to Night
(or Day) display mode. By using Display Mode
button
, adjust brightness Day/Night mode
independently.
Use the
Display Mode button
, or
adjust the dash illumination to full bright
to set the display to your desired choice.
Map Day/Night screen color
choice (see page 113 for the
Day and Night color choices)
N/A
The user can select the color of the screen that will be
displayed for the Day and Night display modes
described above.
For best contrast, ensure that the map
color is white for Day and black for
Night.
00 2RW_ACURA_RDX_KA.book 114 ページ 2011年7月4日 月曜日 午後3時13分