Frequently asked questions – Acura 2012 RDX Navigation User Manual
Page 148
Navigation System 147
2RW_ACURA_RDX KA 31STK830
Frequently Asked Questions
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page 113.
The daytime
map
screen is dark like the night display mode,
and it is hard to see. Why?
Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page 113.
How can I input my destination using map coordinates?
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page 56.
How do I change or remove my PIN?
Go to “Personal Information” in the
SETUP
screen (
Other
), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page 97.
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
PINs are optional. See information regarding PINs on page 97. Your dealer
can reset the PIN for you.
CALL is not available on the
Calculate route to
screen.
Why?
Your phone is not paired to the HFL, or if your phone is paired, it is in use
or does not have good coverage; press the HFL BACK button.
Problem
Solution
00 2RW_ACURA_RDX_KA.book 147 ページ ２０１１年７月４日 月曜日 午後３時１３分