Acura 2013 ZDX - Manual (Page 80)

78
uu Indicators u
In
st
ru
men
t P
a
ne
l
Indicator Name On/Blinking Explanation Message
Lane
Departure
Warning
(LDW)
Indicator
● Comes on for a few seconds when
you change the power mode to
ON, then goes off.
● Comes on if there is a problem
with the LDW system.
● Stays on constantly - Have the vehicle checked by
a dealer.
● Blinks when your vehicle is too
close to the lane lines. The beeper
sounds. ● Blinks while driving - Take appropriate action to
keep your vehicle within the lane lines.
—
● Comes on when the LDW system
shuts itself off. ● Stays on - The temperature inside the LDW camera
is too high.
The system activates when the temperature inside
the camera cools down.
2 LDW Camera P. 200
● Stays on - The area around the camera is blocked by
dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
● Have your vehicle checked by a dealer if the indicator
and message come back on after you cleaned the
area around the camera.
2 LDW Camera P. 200