Acura 2013 ZDX - Manual (Page 302)

300
uu Fuses u Inspecting and Changing Fuses
Handling the Unexpe
cte
d
Inspecting and Changing Fuses
1. Set the power mode to VEHICLE OFF
(LOCK).
Turn headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1 Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
2 Fuse Locations P. 295
There is a fuse puller on the back of the engine
compartment fuse box.
Blown Fuse Fuse
Combined Fuse
Blown Fuse
Fuse Puller