Acura 2013 ZDX - Manual (Page 69)

67
uu Indicators u
Continued
In
st
ru
men
t P
a
ne
l
Indicator Name On/Blinking Explanation Message
Malfunction
Indicator Lamp
● Comes on when you set the power
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine is not
started. If “readiness codes” have
not been set, it blinks five times
before it goes off.
● Comes on if there is a problem
with the emissions control system.
● Blinks when a misfire in the
engine’s cylinders is detected.
● Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 310
● Comes on while driving - Have the
vehicle checked by a dealer.
● Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 293
Charging System
Indicator
● Comes on when you set the power
mode to ON, and goes off when
the engine starts.
● Comes on when the battery is not
charging.
● Stays on while driving - Turn off the
climate control system and rear defogger
in order to reduce electricity
consumption.
2 If the Charging System Indicator
Comes On P. 292