Acura 2013 ZDX - Manual (Page 142)

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
140
Co
ntr
ols
1. Adjust the driver’s seat, the steering wheel
and the outside mirrors to the desired
position, and turn the power mode to ON.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button ( 1 or ( 2 within five
seconds of pressing the SET button.
u Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to ( P.
2. Press a memory button ( ( 1 or ( 2).
u You will hear the beeper, and the
indicator light will blink.
The seat, the steering wheel and the outside
mirrors will automatically move to the
memorized positions. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
• You set the power mode to any position except
ON.
Set Button
Memory Button 1
Memory Button 2
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button, or a memory button ( ( 1 or
( 2).
• Adjust the seat, the steering wheel or the outside
mirror position.
• Shift into any position except ( P.
Memory Buttons