Acura 2013 ZDX - Manual (Page 139)

137
uu Operating the Switches Around the Steering Wheel u Brightness Control
Co
ntr
ols
Brightness Control
When the parking lights are turned on and the
power mode is in ON, you can use the
( + or
( - button to adjust instrument panel
brightness.
Brighten: Press the
( + button.
Dim: Press the ( - button.
You will hear a beeper when the brightness
reaches minimum or maximum. The multi-
information display will return to its original
state several seconds after you adjust the
brightness.
■ Brightness level indicator
The brightness level is shown on the multi-
information display while you are adjusting it.
1 Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
If you press the ( + button until the brightness display
is up to max, the beeper sounds. This cancels the
reduced instrument panel brightness when the
parking lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
You can customize when the glare reduction
function starts.
2 Customized Features P. 92
( -Button
( +Button