Acura Embedded PowerBrick ATOM User Manual

Page 13

Confirm by selecting Yes to discard all changes made and restore the previously saved
settings.
Restore Defaults
To restore the BIOS to default settings, select this field then press . A
dialog box will appear. Confirm by selecting Yes.
Save as User Defaults
To use the current configurations as user default settings for the BIOS, select this field
then press . A dialog box will appear. Confirm by selecting Yes.
Restore User Defaults
To restore the BIOS to user default settings, select this field then press . A dialog
box will appear. Confirm by selecting Yes.
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a particular device,
select the desired device and press .
Launch EFI Shell from filesystem device
To launch EFI shell from a filesystem device, select this field and press .

Appendix : Power Consumption

Power Consumption Measurement

Purpose
The purpose of the power consumption test is to verify the power dissipation of system,
and the loading of power supply.
Test Equipment
PROVA CM-07 AC/DC CLAMP METER

Test Procedure

1.Power up the DUT, boot into Windows 7 x32 Ultimate.
2.Entering standby mode (HDD power down).
3.Measure the power consumption and record it.
4.Run Burn-in test program to apply 100% full loading.
5.Measure the power consumption and record it.

Test Data

Service Contact Information

Acura Embedded Systems Inc.

#1 7711 128 Street Surrey, BC V3W 4E6 Canada.

Tel: 604.502.9666 support@ acuraembedded.com
www. acuraembedded.com