Acura Embedded AcuTab-M7 - Manual (Page 5)

this User Interface for disabling this utility from the screen.
If there is no action within this utility in 5 seconds, the UI screen will close automatically.
System Status Information
This utility shows you the battery capacity status, RF status with its signal strength and
system information, and provides the control panel for the function setting.
For battery capacity status:
AcuTab-M7 is equipped with one internal battery and one optional external battery.
The battery capacity status shown below advises you, that only one internal battery is
embedded with the system which is fully charged, and there is no 2
nd optional battery
installed in the system.
If the system installs both the 1st internal battery and 2nd optional battery, the illustration
shown below indicates its current charging status and capacity.
If 1st battery capacity drops to 15%, the system will display the following warning
message for 5 seconds.
For RF status:
The following RF status shows you that the system is equipped with Wi-Fi, and Bluetooth
functions. If you want to close either of these functions, please refer section for how to
disable it.
The following signal strength shows you that the Wi-Fi function is connecting currently, the
stronger the signal strength, the more scale will show on the bar. If there is no module in
the system, there will be no status scale in the following status bar.
For System Information :
The system information shown
on the left shows you the
hotkey utility version, BIOS and
EC version and you can use
them for customer service
when asked.
8 9