Acura Embedded AcuTab-M7 - Manual (Page 3)


Camera / 2 Mega-pixel (Front-facing)
The built-in camera can be used as a communication device for allowing you to
capture images, record videos, and have video chats. It is 2M pixels and can be used
for transmitting live image through network for video conference.
 Camera / 5 Mega-pixel (Rear-facing)
The built-in high resolution camera can be used as a communication device for
allowing you to capture images, record videos, and have video chats.
 Power / Storage / RF status LED Indicator
Keeps you informed of your system’s current power status, storage access
status, and RF wireless devices ON/OFF status.
 RF ON/OFF Indicator
When LED turns on, white LED indicates that a wireless device (Wifi / Bluetooth
/ WWAN) is activated. When LED turns off, it indicates that all RF devices are being
disabled.
 Storage Access
When LED blinking white indicates that the system is accessing the internal storage
drive.

Power LED Indicator
Letting you know that system is turned on and indicate the battery charging status.
 Lights green when the system is powered on and battery is discharging
 Lights amber when the system is powered on and battery is charging
 Lights blinking amber when the system is in S3 sleep mode and battery is
charging or lights blinking green when the system is in S3 sleep mode and
battery is fully charged
 Lights off when system is powered off or the battery is fully charged.
 Power Button
Switch the computer power on and off, or resumes whenever it is in Suspend mode
(by OS define).
 USB Ports
The two USB (type-A) ports allows you to connect USB 2.0-compliant devices (for
example, mouse, keyboard and so on) to your Tablet PC.
 3.5mm Headphone Jack
Allows you to connect an external 3.5mm 4-conductor TRRS (stereo-plus-mic)
headphone for personal listening and sound recording.
 Micro SD Card Slot
The Micro SD (SDHC) card slot allows you to transfer/record video and pictures to
your tablet, while adding extra storage capacity.
 Ethernet Port
The 10/100Mbps Ethernet port allows you to connect to other computers/networks
through a local area network (LAN).
 RS-232 Serial Port
RS-232 serial port allows connections to modems, printers, mice, barcode readers,
data acquisition equipment, and other peripheral devices.
 Accessory Door
By removing the two long screws on top side of the system, allows you to install
optional snap-on module.
 External Battery Connector
To install the external battery pack, install external battery holder first and remove the
cover of external battery connector before snap the battery pack into the external
battery connector.

Speaker
Integrated stereo speaker for sound and audio output for your multimedia
presentations or listening pleasure.
 Protective Rubber
To prevent system harm from vibration or shock, the system is designed with
installing protective rubber on four corners.
 Programmable Function Buttons (F1~F4)
These buttons is programmable to execute specific software application. When you
program the application to launch, please write this directory as listed below into the
configuration file, then the system will aware and execute this application.
1. RF ON/OFF
2. Storage Access
3. Power LED Indicator
4 5