Acura Embedded AcuTab-M7 - Manual (Page 4)

[Setup]
F1_EXE="c:\windows\explorer.exe"
F1_PARA=""
F1_PATH=""
F2_EXE="C:\Program Files\Windows Media Player\wmplayer.exe"
F2_PARA="/prefetch: 1"
F2_PATH=""
F3_EXE="C:\WINDOWS\system32\osk.exe"
F3_PARA=""
F3_PATH=""
F4_EXE="C:\WINDOWS\system32\taskmgr.exe"
F4_PARA=""
F4_PATH=""
The configuration file is located under drive C: root directory as
"c:\FKeySet.txt"
 Trigger Buttons (F1 / F4)
Please press F1 or F4 function keys to trigger to scan the barcode when the optional
barcode scanner snap-on module is installed.
If your system does not install this module, these buttons can be programmable to
execute specific software application. When you program your application, please
write this directory as listed below into your configuration file, then the system will
aware and execute this application.
F1_EXE="c:\windows\explorer.exe"
F1_PARA=""
F1_PATH=""
F4_EXE="C:\WINDOWS\system32\taskmgr.exe"
F4_PARA=""
F4_PATH=""

DC-Jack
Lets you connect the AC power adapter in supplying continuous power to your Tablet
PC and recharging the battery.
The AC adapter provides external power source to your system and charges the
internal battery pack at the same time. The AC adapter also has an auto-switching
design that can connect to any 100VAC ~ 240VAC power outlets.
To connect the power adapter:
1. Plug the AC adapter connector to the DC-Jack socket on the left side of the system.
2. Plug the power cord to the AC adapter.
Plug the other end of the power cord to a live wall outlet, at the same time, the
Power LED at front panel lights up.
-- For the power supply of this equipment, an approved power cord has to be used.
-- Make sure the socket and any extension cord(s) you use can support the total current load
of all the connected devices.
-- Remove all power from the device prior to installing or removing any accessories,
hardware, or cables
-- Before cleaning the system, make sure it is disconnected from any external power supplies
(i.e. AC adapter).
 Docking Connector 

Lets you connect the system to docking station to dock the tablet PC when you are at
home or office desk. 
Using the Hotkey Utility Application
AcuTab-M7 has numbers of applications on the control panel for executing specific
command. It provides you to adjust brightness, volume, launch webcam, switch monitor
(via docking) and RF device ON/OFF.
This user interface provides specific mobile utility to let you easily setup some helpful
functions and aware the system status directly.
This utility also let you adjust some function to fit the requirements, such as brightness
and volume adjustment, webcam launch, monitor switching and RF device ON/OFF.
Furthermore, it also provides system information for your reference, such as battery
status, RF setting with its signal strength, firmware (BIOS & EC) version information.
Besides these features, you can press the soft button to hibernate this system.
About the User Interface
Enable or disable the User Interface
To display the User Interface, please press the Fn button or point the Hotkey Utility icon
located on Windows desktop.
To close the User Interface function, please press the X button on the top right corner on
6
7