Acura Embedded AcuTab-M7 User Manual
Page 10
Boot Management Setup
This page allows you to set the search drive sequence where the system will try to boot
up first.
To select the boot device, you can use the up or down arrow key, then press <+> to move
up the device in the list or press <-> to move down the device in the list. To exit from this
menu, press <Esc>.
Exit Control
•
Exit Saving Changes When you select this option, it will pop-out the following
message, “Save configuration changes and exit setup?” Select [OK] to save the
changes and exit the BIOS SETUP UTILITY.
•
Exit Discarding Changes When you select this option, it will pop-out the following
message, “Discard changes and exit setup?”. Select [OK] to exit the BIOS SETUP
UTILITY without saving any changes.
•
Load Setup Defaults When you select this option, it will pop-out the following
message, “Load optimal defaults?” Select [OK] to load the default values for all the
setup configurations.
•
Save Changes When you select this option, it will pop-out the following message,
“Save changes?” Select [OK] to save all changes.
Technical Support
contact your
Mailing address: Acura Embedded Systems Inc.
Unit #1, 7711-128th Street, Surrey, BC V3W 4E6, CANADA
Ph: (604) 502-9666 Fax: (604) 502-9668
Toll Free 1-866-502-9666
With the unique set of products, Acura Embedded Systems remains
committed to its goal of providing trouble-free and customer-friendly
service. A special customer service unit has been set up specifically to
cater to our esteemed customers' needs.
18