Activeforever RemRest 901 CPAP Machine - Manual (Page 9)

RemRest 9
RemRest Flow Generator Operation
• Place the RemRest device on a flat, sturdy
surface with the back of the unit away
from heating vents, radiators, curtains
and other objects that could restrict air
intake.
• Secure the mask, connect the tubing, and
prepare any accessories you might use
prior to operation of the RemRest device.
It is recommended that the device be left
plugged in when not in use. This is especially
helpful for Tier 2 and 3. Tier 2 does not have
a battery and therefore only “remembers”
plugged in time with regards to time used
and time plugged in. Tier 3 has an internal
battery and therefore will “remember” all of
its times without being plugged in. However,
it will save the battery if the unit remains
plugged in when not being used, i.e. during
the day.
RemRest Tier 1
There are two options to provide power to
the CPAP: AC or DC power.
1. For AC Power, plug one end of the AC
power cord into the AC inlet plug located
on the back of the RemRest device. Plug
the other end into the wall socket. Go to
Step 3.
2. If using the DC power cord with auto
adapter for operation of the RemRest in a
motor vehicle or recreational vehicle,
insert the plug into the DC jack located on
the back of the CPAP and plug the other
end into the vehicle’s 12V DC outlet.
NOTE
The device will draw a
small amount of power
when plugged in but
not “On”.