Activeforever RemRest 901 CPAP Machine - Manual (Page 11)

RemRest 11
5. If the ramp function is not already set,
simply pushing the ramp button on once
the unit is running will not start the ramp
function. To initiate the ramp function:
• If the device motor is running, turn off
the device by pushing on/off button
(ramp light and on/off light turn off)
• Push the ramp button on (ramp light
turn on)
• Turn ON the device by pushing on/off
button (ramp light and on/off light on).
The CPAP will start at the prescribed low
setting and accelerate through the ramp
time to prescribed pressure setting.
6. To turn off the ramp function: While the
unit is running, push the ramp ON/OFF
button. The ramp light will go out and the
unit will go to the prescription pressure
setting. When the device is turned on
again, the RemRest will accelerate to the
prescription setting without the ramp.
7. Turn OFF the device (ramp light and
on/off light turn off) by pressing the
ON/OFF button.
RemRest Tier 2 & Tier 3
There are two options to provide power to
the CPAP: AC or DC power.
1. For AC Power, plug one end of the AC
power cord into the AC inlet plug located
on the back of the RemRest device. Plug
the other end into the wall socket. Go to
Step 3.
2. If using the DC power cord with auto
adapter for operation of the RemRest in a