Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 42)

42
36
Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
21
Set the " 17 Duration of break time".
Push the [SET] button again to set
the left-side number at "17" by
pressing the [+] button. Once you
push the [SET] button, flashing of
the display will change to
"Minutes". In case of the example,
push the [+] or [-] button to set at
"30" and push the [SET] button.
At that moment, the display will
change from flashing to steady.
Range of values: 1-99 min.
(" " makes the function disabled.)
SET FUNCTION
SCHEDULE
SET FUNCTION
SCHEDULE
SET FUNCTION
SCHEDULE
20
AM
Colon
Date
Program No.
Minute