Pch 3098 – Acnodes PCH 3298 User Manual

Page 25

PCH 3098

8 inch Atom Fanless Panel PC

All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.

14628 Central Ave.

Chino, CA91710

Tel:909.597.7588, Fax:909.597.1939

22. H7 /H9

: SDVO CARD SCREW HOLES, two screw holes for SDVO card assemble.

23. H 3/H4/H5 /H6:

Intel Atom Z530P(or Z510P) CPU+ US15W Heat Sink SCREW HOLES, Four

screw holes for Intel CPU and US15W Heat Sink assemble.

24.

LED 1/LED2

LED STATUS.

LED1:Motherboard

Standb y Po wer Goo d statu s

LED2 :

Motherboard

CPU Pow er G ood status.

25 . U SB6 7:

(2.0mm Pitch 2x5 Pin Header),Front USB connector, it provides two USB ports via a

dedicated USB cable, speed up to 480Mb/s.

U SB6 an d U SB7 can only be used for int ernal dev ice attachment as USB 2.0

SpecIfi-

cation, Can not support USB1.1 and USB 1.0 Specification.

Signal Name

Pin#

Signal Name

+5V

USB6_N

USB7_N

USB6_P

USB7_P

Ground

Note:

Before connection, make sure that pin out of the USB Cable is in accordance with that of the said

tables. Any inconformity may cause system down and even hardware damages.

2 6. IDE_CF1:

(

Card socket), it is located at the bottom of the board and serves as an insert

interface for Type I and Type II Compact Flash card. The operating voltage of CF card can be set as

3.3V or 5V.

The default setting of the product is 3.3V.

2 7. J TA G1:

Reserve.