Pc 8120, Inch core 2 duo touch panel pc – Acnodes PC 8120 User Manual

Page 37

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PC 8120

12-inch Core 2 Duo touch panel PC

3.10 PnP/PCI Configuration Setup

This section describes configuring the PCi bus system. PCI, or Personal Computer Interconnect, is a system which

allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special
components. This section covers some very technical items and it is strongly recommended that only experienced users
should make any changes to the default settings.

- Reset Configuration Data

Normally, you leave this item Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when

you exit Setup or if installing a new add-on cause the system reconfiguration a serious conflict that the operating system can
not boot. Options: Enabled, Disabled.

- Resources Controlled By
The Award Plug and Play BIOS can automatically configure all boot and Plug and Play-compatible devices. If you

select Auto, all interrupt request (IRQ), DMA assignment, and used DMA fields disapper, as the BIOS automatically assigns
thm. The default value is “Manual”.

- IRQ Resources
When resources are controlled manually, assign each system interrupt to one of the following types in accordance

with the type of devices using the interrupt:

1. Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific interrupt (such as IRQ4

for serial port 1).

2. PCI/ISA PnP Devices compliaant with the Plug and Play standard, whethere designed for PCI or ISA bus

architechture.