Pc 5150, Pc 8120 – Acnodes PC 8120 User Manual
Page 36
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
36
PC 8120
12-inch Core 2 Duo touch panel PC
- HDD Power Down
If HDD activity is not detected for the length of time specified in this field, the hard disk drive will be powered down while
all other devices remain active.
- Sort-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It also allows the user to define which type of soft
power OFF sequence the system will follow. The default value is “Instant-Off.”
- Wake-Up by PCI card
If endable this item, the system can automatically resume when the PCI Modem or PCI LAN card receives an incoming
call.
- Power on by Ring
This option allows the system to resume or wake up upon detecting any ring signals coming from an installed modem.
The default value is “Enabled”.
- Resume by Alarm
If enable this item, the system can automatically resume after a fixed time in accordance with the system’s RTC
(realtime clock).
**Reload Global Timer Events**
Global Timer (power management) events can prevent the system from entering a power saving mode or can awaken
the system from such a mode.
- Primary/Secondary IDE 0/1
Use this item to configure the IDE devices monitored by the system.
- FDD, COM, LPT Port
Use this item to configure the IDE devices monitored by the system.
- PCI PIRQ (A-D)#
This item can be used to detect PCI device activities; if no activity, the system will eneter the sleep mode.
Press