Pc 5150, Pc 8120 – Acnodes PC 8120 User Manual

Page 2

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PC 5150

15-inch touch panel PC

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

PC 8120

12-inch Core 2 Duo touch panel PC

Disclaimers

This manual has been carefully checked and believed to contain accurate information. Acnodes Corp. assumes no

responsibility for any infringements of patents or any third party’s rights, and any liability arising from such use.

Acnodes Corp. reserves the right to change or revise this document and/or product at any time without notice.

No part of this document may be reproduced, stored in retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, photocopying, recording, or otherwose, without the prior written permission of Acnodes Corp.

Safety Precautions

Before getting started, please read the following importantly safety precautions.

1. The PC 8120 Series does not come equipped with an operating system. An operating system must be loaded first

before installing any software into the computer.

2. Be sure to groud yourself to prevent static charge when installing the internal components. Use a grouding wrist

strap and place all electronic components in any staticshielded devices. Most electronic components are sensitive to static
electrical change.

3. Disconnect the power cord from the PC 8120 Series before any installation. Be sure both the system and external

devices are turned OFF. A sudden surge of power could ruin sensitive components that the PC 8120 Series must be properly
grounded.

4. The brightness of the flat panel display will be getting weaker as a result of frequent usage. However, the operating

period varies depending on the application environment.

5. Turn OFF the system power before cleaning. Clean the system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PC 8120 Series may come with or w/o a touchscreen. Although the touchscreen us chemical
resistant, it is recommended that you spray the liquid cleaner on a cloth first before qiping the screen. In case your system
comes without the touchscreen, you must follow the same procedure and not spray any cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen. Scratches on the touch screen may cause malfunction or

internail failure to the touchscreen.

7. The flat panel display is not susceptible to shock or vibration. When assembling the PC 8120, make sure it is

securely installed.

8. Do not open the system’s back cover. If opening the cover for maintenance is a must, only a trained technician is

allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from
electrostatic discharge, observe the following precautions:

- Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds.

This will help to discharge any static electricity on your body.

- When handling boards and components, wear a wristgrounding strap, available from most electronic component

stores.