Acnodes OPC 8190 - Manual (Page 51)

 Boot Settings Configuration
 Quick Boot
Enabling this item lets the BIOS skip some power on self
tests (POST). The default setting is Enabled.
 Quiet Boot
Disabled
Set this item to allow the computer system
to display the POST messages.
Enabled
Set this item to allow the computer system
to display the OEM logo. This is the
default setting.
 AddOn ROM Display Mode
This item selects the display mode for option ROM. The
default setting is Force BIOS.
 Boot Num-Lock
Use this item to select the power-on state for the NumLock.
The default setting is On.
 PS/2 Mouse Support
This item determines if the BIOS should reserve IRQ12 for
the PS/2 mouse or allow other devices to make use of this