Rmc 7130 – Acnodes RMC 7130 User Manual

Page 97

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7130

1U Rackmount System

B-2

Installing Windows on Non-RAID Systems

1. Insert Microsoft's Windows XP/2003 Setup CD in the CD drive and the sys- tem will start boot-
ing up from the CD.

2. Press the key when the message "Press F6 if you need to install a third party SCSI or
RAID driver" displays.

3. When the Windows XP/2003 Setup screen appears, press "S" to specify ad- ditional device(s).

4. Insert the driver diskette you want to install into Drive A: and press the key.

5. Press the key to proceed with the installation process. (If you need to specify any addi-
tional devices to be installed, do it at this time.) Once all devices are specified, press the
key to continue with the installation.

6. From the Windows XP/2003 Setup screen, press the key. The XP/2003 Setup will
automatically load all device files and then continue with the Windows XP/2003 installation.

7. After the Windows XP/2003 OS installation is complete, the system will auto- matically reboot.

8. Insert the Supermicro Setup CD that came with your system into the CD drive during system
boot, and the main screen shown on page 5-26 will display. Follow the instructions given to com-
plete the installation.