Rmc 7130 – Acnodes RMC 7130 User Manual

Page 14

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7130

1U Rackmount System

1-3

Server Chassis Features

The SC512-200 is a mini 1U rackmount server platform configuration. The following is a general
outline of the main features of the SC512-200 chassis.

System Power

When configured as a SuperServer 5015B-MF, the SC512-200 chassis includes a single 200W power
supply.

SATA Subsystem

The SC512-200 chassis was designed to support one internal 3.5" Serial ATA hard drive. This SATA
drive is not hot-swappable; power must be removed from the system before installing or replacing.
ATA/100 IDE drives can be alternately supported.

Note: The operating system you use must have RAID support to enable the hot- swap capability of the
SATA drives.

Control Panel

The control panel on the SC512-200 provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activity, overheat warning and fan failure. A
main power button and a system reset button are also included. Below the control panel are two USB
ports for front side access.

Rear I/O Panel

The rear I/O panel on the SC512-200 provides one motherboard expansion slot, one COM port (an-
other is internal), two USB ports, PS/2 mouse and keyboard ports, a graphics port and two Gb
Ethernet ports.

Cooling System

The SC512-200 chassis has an innovative cooling design that features one 10-cm blower-type system
cooling fan. The blower fan plugs into a chassis fan header on the motherboard and an air shroud
channels the airflow to efficiently cool the processor area.

A fan speed control setting in BIOS allows fan speed to be determined by system temperature [the
recommended setting is 3-pn (Server)].