Rmc 7130 – Acnodes RMC 7130 User Manual

Page 74

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7130

1U Rackmount System

Intel Turbo Boost Configuration

Turbo Ratio Limit Program

Select Enabled to set the processor's clock ratio in relation to the bus speed. The options are Enabled
and Disabled. The default value depends on the type of CPU installed. (For example, the values shown
below indicate that an Intel® Core™ i7 processor 965 Extreme Edition is installed.)

1 - Core Ratio Limit

This increases (multiplies) the processor's core 1 clock speed in relation to the bus speed. The
default setting is 26. Press "+" or "-" on your keyboard to change this value.

2 ~ 3 - Core Ratio Limit

This increases the processor's core 2~3 clock speeds in relation to the bus speed. The default setting
is 25. Press "+" or "-" on your keyboard to change this value.

TDC Limit Override

This option will override the system's default electrical current setting for the processor. The options
are Enabled and Disabled.

TDC Limit Value

This option sets the processor's electrical current value. The default setting is

880. Press "+" or "-" on your keyboard to change this value.

TDP Limit Override

Select Enabled to override the default power setting for the processor. The op- tions are Enabled and
Disabled.

TDP Limit Value

Use this option to set the processor's power value. The default setting is 1040.

Press "+" or "-" on your keyboard to change this value.

C1E Support

Select Enabled to use the "Enhanced Halt State" feature. C1E significantly reduces the CPU's power
consumption by reducing the CPU's clock cycle and voltage during a "Halt State." The options are
Disabled and Enabled.