Pc 5150, Pc 8153 – Acnodes PC 8153 User Manual
Page 36
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
36
PC 8153
15-inch touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218,
Video Off In Suspend
This item defines if the video is powered down when the system is put into suspend mode.
Suspend Type
If this item is set to the default Stop Grant, the CPU will go into Idle Mode during power saving mode.
Moden Use IRQ
If you want an incoming call on a modem to automatically resume the system from a power saving mode, use this item to
specify the interrupt request line (IRQ) used by the modem. You might have to connect the fax/modem to the board Wake On
Modem connector for working this feature.
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour), all devices except the CPU shut off. The default value is
"Disabled".
HDD Power Down
If HDD activity is not detected for the length of time specified in this field, the hard disk drive will be powered down while
all other devices remain active.
Soft-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It also allows the user to define which type of soft power OFF
sequence the system will follow. The default value is "Instant-Off".
Wake-Up by PCI card
If enable this item, the system can automatically resume when the PCI Modem or PCI LAN card receives an incoming call.
Power On by Ring
This option allows the system to resume or wake up upon detecting any ring signals coming from an installed modem. The
default value is "Enabled".
Resume by Alarm
If enable this item, the system can automatically resume after a fixed time in accordance with the system's RTC real time
clock.