Pc 5150, Pc 8153 – Acnodes PC 8153 User Manual

Page 28

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PC 5150

15-inch touch panel PC

PC 8153

15-inch touch panel PC

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

Typematic Rate (Chars/Sec)

This option refers to character numbers typed per second by the keyboard. The default value is "6".

Typematic Delay (Msec)

This option defines how many milliseconds must elapse before a held-down key begins generating repeat characters. The
default value is "250".

Security Option

This item allows you to limit access to the system and Setup, or just to Setup. The default value is "Setup".

NOTE To disable the security, select PASSWORD SETTING at Main Menu and then you will be asked to enter a password.
Do not type anything, just press and it will disable the security. Once the security is disabled, the system will boot
and you can enter Setup freely.

APIC Mode

Use this item to enable or disable APIC (Advanced Programmable Interrupt Controller) mode that provides symmetric multi-
processing (SMP) for systems.

MPS Version Control For OS

This item specifies the version of the Multiprocessor Specification (MPS). Version 1.4 has extended configuration tables to
improve support for multiple PCI bus configurations and provide future expandability.

Small Logo (EPA) Show

If enabled, the EPA logo will appear during system booting up; if disabled, the EPA logo will not appear.

Press to return to the Main Menu page.