Pc 5150, Pc 8153 – Acnodes PC 8153 User Manual
Page 32
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
32
PC 8153
15-inch touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218,
SATA Mode
There are these options for you to set up SATA mode: IDE, RAID or AHCI.
NOTE ICH8DO supports AHCI under Microsoft Windows VISTA and Microsoft Windows XP. ICH8 only supports AHCI under
Microsoft Windows VISTA.
LEGACY Mode Support
Legacy mode support allows devices to function in an operating environment that is not USB-aware.
Press
Super IO Device
Scroll to this item and press
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you
install and-in FDC or the system has no floppy drive, select Disabled in this field. The options available are Enabled, Dis-
abled.
Onboard Serial Port 1/2/3/4
Select an address and corresponding interrupt for the serial port. Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,
Disabled, Auto.
Serial Port 1/2/3/4 Use IRQ
These items assign which I/O address to access onboard serial port 1/2/3/4.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which I/O address. The options available are
378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled. The 3BC option does not support any EPP modes.