Accusys ACS-75130 - Manual (Page 8)

English - 8
Drive Carrier Locks
The driver carrier lock acts as an On/Off
switch for the drives and provides security
by preventing non-key holders from
accessing the drives. When you lock the
drives, the first drive to get locked is
designated as the source drive and the
other drive becomes the backup drive.
Two identical keys are provided with the system. To lock each
carrier, insert the key and turn it in a clockwise direction. To
unlock a carrier, turn the key in a counterclockwise direction.
Error Message:
The chart offers the all-possible error messages, and can help
you to identify certain problems.
★ Drive Carriers LED Error Status Display
☆ Disk Fail (Replace the failed disk with another disk)
☆ Target Disk Size small than Source Disk (Replace the
failed target disk with a disk that’s size is greater or
equal to the source disk.)
☆ Target Disk UDMA Mode small than Source Disk
(Replace the failed target disk with a disk that’s
UDMA mode is greater or equal to the source disk.)