Accusys ACS-75130 - Manual (Page 4)

English - 4
Welcome
Congratulations on your selection of the 7500. The 7500 are a
reliable and affordable solution for RAID 1 disk mirroring.
With a cost effective IDE approach, the 7500 mirrors data to
two disk drives simultaneously, and delivers optimized
performance, comparable to more costly SCSI based
solutions. If one drive fails, data is secured by the other drive
and alarm sounds to alert you.
Featuring intelligent online recovery, the 7500 lets you hot
swap a failed drive and the 7500 automatically rebuild the
data to the new drive without any system down time. The
7500 Controller Box features a user-friendly rack design that
lets you easily install a backup drive, or replace a drive that
fails. Each hard drive carrier supports a one-inch high
3.5-inch form factor disk drive. Additional data security is
provided by a key-locking system, that prevents unauthorized
access to each disk drive.
7500 supports all hard disk manufacturer IDE hard drives that
confirm to the industry hard disk standard as IBM, Quantum,
Maxtor, Seagate, Samsung, and Fujitsu. 7500 also supports
Western Digital hard drive but please contact your 7500
supplier for necessary component. The location and distance
between IDE and Power connector in 7500 drive carriers
follow the specification in AT Attachment (ATAPI spec). The
IDE connector of the Western Digital disk drive has a 1-2 mm
alignment difference compared to drives of other brands.
Therefore, please specify before you ordering 7500 or contact