Candy FS 828 ZEN - Manual (Page 13)

12 GB
Button for regulation and confirmation
SETTINGS: quantity/weight, temperature, programming cooking and end of cooking
time. Regulated by turning the button toward “-” or “+”
TO CONFIRM SETTINGS: press the button:
Oven selector
knob Function selector
knob
Dispay panel: time, programming of cooking mode, indicator lights, cooking temperature
function and shelf positioning
CONTROL PANEL DESCRIPTION
DESCRIPTION OF THE DISPLAY
BEFORE USING THE OVEN FOR THE FIRST TIME
• PRELIMINARY CLEANING
- clean the oven before using for the first time:
. wipe over external surfaces with a damp soft cloth.
. Wash all accessories and wipe inside the oven with a solution
of hot water and washing up liquid.
. Set the empty oven to the maximum temperature and leave
on for about 1 hour, this will remove any lingering smells of
newness. Ensure that the room is well ventilated while this is
being done.
• THINGS TO REMEMBER
Confirmation of operation: modification must be confirmed
by pressing the central button.
Stopping the oven: this may be necessary if you have input
an incorrect instruction.
To stop the oven .... turn back the function selector knob
to the Stop Position.
Child safety device: To lock the oven controls, select the child
safety device. Refer to the section entitled "Programming - The
child safety device".
The cooling fan: this protects the control panel and electronics
from heat damage.
It begins and then stops automatically even when the oven is
switched off.
Oven lighting: By turning to the light symbol, you can switch
on the oven light when it is not in use.
When the oven is in use, the light stays on during all of the
oven functions and when the door is opened.
• CLOCK SETTING
When the oven is connected to the electricity supply or after a
long power cut, the clock must be re-set.
. To set the clock :
1-Turn the control knob to the "Clock" symbol :
2-When the minutes flash, set the central button by turning to the
"-" or "+" symbol. Confirm by pressing the central button.
3-The hours will then flash, set with the central button by turning
to the "-" or "+", confirm by pressing the central button.
4-Turn back the control to the STOP position, the new hour is set.
• LANGUAGE CHOICE
The pre-set language setting on the display panel is in Italian, but
it can be changed.
To change the language display, carry out the following
procedure :
1- Turn the programme selector knob to "Light" symbol.
2- Press the central button in and hold for 3 seconds. The display
panel will show ITALIANO. Turn the button until the required
language appears and confirm by pressing the same button.
The display will disappear.
3-Your selection is now confirmed. Turn the programme selector
knob back to the STOP position.
Programme symbol display: cooking
Textual zone
Indicator light:
rising temperature Cooking temperature
ex.: 200°C
or grilling functioning
Cooking quantity
(persons or weight)
Time
ex.: 9 hours
Time
Timer and End
Programmation display:
cooking time, timer and
end
Selected cooking mode:
Auto: illuminated display,
Automatic mode
Auto off: manual mode
Indicator light:
child safety device
Oven
functioning
display and
recommended
livel position
L