JVC GZ-MG330 - Manual (Page 15)

15
ENGLISH
Checking the Remaining Battery
Power
Preparation:
• Attach the battery pack.
• Press the SELECT PLAY/REC button to
select recording mode.
For mode:
Press the INFO button twice or the INFO
button and then select
.
For mode:
Press the INFO button.
DIRECT
BACK UP
INFO
BATTERY CONDITION
MAX TIME
min
QUIT
To return to the normal screen
Press the INFO button again.
NOTES
• If “COMMUNICATING ERROR” appears,
there may be a problem with your battery.
In such a case, consult your nearest JVC
dealer.
• The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
Preparing the Remote Control*
A battery is included inside the remote control at
the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
NOTE
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
*
GZ-MG330 model does not include the remote
control.
To Reinsert the Battery
Pull out the battery holder by pressing the lock
tab.
Lock Tab
Lithium Battery
(CR2025)
Effective distance:
5 m
Remote Sensor
Other Settings
Attaching the Shoulder Strap
Eyelet
Strap Guide
Buckle