HONDA 2013 CR-Z - Manual (Page 99)

98
Co
ntrols
Setting the Clock
Clock
You can adjust the time in the clock display, using the CLOCK (AM/FM) button with
the ignition switch in ON
( w .
1. Press and hold the CLOCK button until the clock display begins to blink.
2. Press the ( 1 (Hour) button to change the hours.
3. Press the ( 2 (Minute) button to change the minutes.
4. Press the CLOCK button to go back to the normal display.
■
Adjusting the Time
1 Clock
To set the time to the nearest hour:
Press and hold the CLOCK button until the clock
display begins to blink, then press the
( 3 (Reset)
button.
Depending on the displayed time, the clock sets
forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
Models with navigation system
Models without navigation system
( 2 Button
( 1 Button
( 3 Button
CLOCK Button
Clock Display
13 CR-Z-31SZT6200.book 98 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
TOC