HONDA 2013 CR-Z - Manual (Page 290)

289
Shift Lever Does Not Move
Follow the procedure below if you cannot move the shift lever out of
the
( P position.
1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Wrap a cloth around the tip of a small flat-
tip screwdriver. Put it into the shift lock
release slot as shown in the image, and
remove the cover.
4. Insert the key into the shift lock release slot.
5. While pushing the key down, press the shift
lever release button and place the shift lever
into
( N .
u The lock is now released. Have the shift
lever checked by a dealer as soon as
possible.
■ Releasing the Lock
Automatic transmission (CVT) models
Slot Cover
Release
Button
Shift
Lock
Release
Slot
13 CR-Z-31SZT6200.book 289 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
Han
d
lin
g the U
n
expected
TOC