Automatic lighting control – HONDA 2013 CR-Z User Manual
Page 113
uu
Operating the Switches Around the Steering Wheel
u
Light Switches
112
Co
ntrols
Automatic lighting control can be used when
the ignition switch is in ON
(
w
.
When you turn the light switch to AUTO, the
headlights and other exterior lights will switch
on and off automatically depending on the
ambient brightness.
u
You can change the AUTO light
sensitivity setting.
■
Automatic Lighting Control
*
1
Automatic Lighting Control
*
We recommend that you turn on the lights manually
when driving at night, in a dense fog, or in dark areas
such as long tunnels or parking facilities.
The light sensor is in the location shown below.
Do not cover this light sensor with anything;
otherwise, the automatic lighting system may not
work properly.
Adjust the AUTO light sensitivity as follows:
Setting
The exterior lights come on
when the ambient light is at
MAX
Bright
HIGH
MID
LOW
MIN
Dark
Light Sensor
*
Not available on all models
13 CR-Z-31SZT6200.book 112 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
TOC