HONDA 2013 CR-Z - Manual (Page 283)

uu If a Tire Goes Flat u Temporarily Repairing a Flat Tire
282
Han
d
lin
g the U
n
expected
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes.
u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
4. Unscrew the air only hose (black) to remove
it from the sealant bottle.
■ Distributing the Sealant in the Tire 1 Distributing the Sealant in the Tire
Stop and recheck the air pressure after every 10
minutes of driving as necessary until you reach the
nearest service station where you should have the tire
permanently repaired or replaced.
Speed Restriction
Label
Air Only Hose
Sealant
Bottle
13 CR-Z-31SZT6200.book 282 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
TOC