Flat, P. 271, P 271) – HONDA 2013 CR-Z User Manual
Page 272: P271), If a tire goes flat, Changing a flat tire
271
Continued
If a Tire Goes Flat
Changing a Flat Tire
*
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually
to reduce speed. Then, stop in a safe place. Replace the flat tire with a compact
spare tire. Go to a dealer as soon as possible to have the full-size tire repaired
1. Park the vehicle on firm, level, and non-slippery surface and apply the
parking brake.
2. Move the shift lever to
(
P
.
2. Move the shift lever to
(
R
.
3. Turn on the hazard warning lights and turn the ignition switch to LOCK
(
0
.
1
Changing a Flat Tire
*
Follow compact spare precautions:
Periodically check the tire pressure of the compact
spare. It should be set to the specified pressure.
Specified Pressure: 60 psi (420 kPa, 4.2 kgf/cm
2
)
When driving with the compact spare tire, keep the
vehicle speed under 50 mph (80 km/h). Replace with
a full-size tire as soon as possible.
The compact spare tire and wheel in your vehicle are
specifically for this model.
Do not use them with another vehicle.
Do not use another type of compact spare tire or
wheel with your vehicle.
Do not mount tire chains on a compact spare tire.
If a chain-mounted front tire goes flat, remove one of
the full-size rear tires and replace it with the compact
spare tire. Remove the flat front tire and replace it
with the full-size tire that was removed from the rear.
Mount the tire chains on the front tire.
NOTICE
Do not use a puncture-repairing agent, other than
the one provided in the kit that came with your
vehicle. If used, you may permanently damage the
tire pressure sensor.
Automatic transmission (CVT) models
Manual transmission models
All models
*
Not available on all models
13 CR-Z-31SZT6200.book 271 ページ 2012年10月25日 木曜日 午後9時9分
Home
QRG
Index
2013 CR-Z
Han
d
lin
g the U
n
expected
TOC
or replaced.