HONDA 2013 CR-Z - Manual (Page 280)

Continued 279
uu If a Tire Goes Flat u Temporarily Repairing a Flat Tire
1. Remove the valve cap from the tire valve
stem.
2. Remove the sealant/air hose (clear) from
the packaging.
3. Attach the sealant/air hose onto the tire
valve stem. Screw it until it is tight.
■ Injecting Sealant and Air 1 Injecting Sealant and Air
In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.
The sealant can permanently stain clothing and other
materials. Be careful during handling and wipe away
any spills immediately.
3 WARNING
Tire sealant contains substances that are
harmful and can be fatal if swallowed.
If accidentally swallowed, do not induce
vomiting. Drink plenty of water and get
medical attention immediately.
For skin or eye contact, flush with cool
water and get medical attention if
necessary.
Valve Cap
Valve Stem
Sealant/Air Hose (Clear)
Valve Stem
Sealant/Air Hose
13 CR-Z-31SZT6200.book 279 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
Han
d
lin
g the U
n
expected
TOC