HONDA 2013 CR-Z User Manual
Page 180
Continued
179
uu
When Driving
u
Starting the Engine
3. Turn the ignition switch to START
(
e
without depressing the accelerator pedal.
1. Keeping your right foot on the brake pedal, release the parking brake. Check that
the parking brake and brake system indicator has gone off.
2 Parking Brake P. 208
2. Put the shift lever in
(
D
. Select
(
R
when reversing.
3. Gradually release the brake pedal and gently depress the accelerator pedal
to pull away.
1
Starting the Engine
Do not hold the key in START
(
e for more than 15
seconds.
•
If the engine does not start right away, wait for at
least 10 seconds before trying again.
•
If the engine starts, but then immediately stops,
wait at least 10 seconds before repeating step 3
while gently depressing the accelerator pedal.
Release the accelerator pedal once the engine
starts.
The immobilizer system protects your vehicle from
theft. If an improperly coded key (or other device) is
used, the engine's fuel system is disabled
■
Starting to Drive
Automatic transmission (CVT) models
13 CR-Z-31SZT6200.book 179 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Home
QRG
Index
2013 CR-Z
Driving
TOC