MITSUBISHI ELECTRIC MDT552S - Manual (Page 54)

English-50
OSD screen functions (continued)
SCREEN

H POSITION
You can adjust the horizontal image position.
Press the PLUS (+) button to move the image to the right.
Press the MINUS (-) button to move the image to the left.

V POSITION
You can adjust the vertical image position.
Press the PLUS (+) button to move the image up. Press the
MINUS (-) button to move the image down.

CLOCK
* For the D-SUB inputs only.
You can adjust the image size of the computer and eliminate
blurred letters.
Press the PLUS (+) button to expand the width of the image
on the screen to the right. Press the MINUS (-) button to
narrow the width of the image on the screen to the left.

CLOCK PHASE
* For the D-SUB inputs only.
You can adjust the level of the periodic variation of the
screen fl icker.

ZOOM MODE
You can select the mode to stretch the image to fi t it to the
screen.
For the HDMI1, HDMI2, DVI-D, D-SUB, and DISPLAYPORT
inputs, you can select FULL, NORMAL, CUSTOM, or REAL.
For YPbPr, S-VIDEO, and VIDEO, you can select FULL,
NORMAL, DYNAMIC, CUSTOM, or REAL.
FULL:
The image is stretched to fi ll the screen
regardless of its aspect ratio.
NORMAL: The image is stretched vertically to the full
height of the screen while keeping the aspect
ratio.
DYNAMIC: The image is stretched to fi ll the screen with
different magnifi cations at the screen center
and the screen edges.
CUSTOM: You can stretch the image horizontally and
vertically as you desire using the CUSTOM
ZOOM setting.
REAL: The image is displayed without being stretched
or reduced.
NOTE: The DYNAMIC mode displays images having the
16:9 aspect ratio, such as those with 1920 x 1080
resolution, in the same way as in the FULL mode.

CUSTOM ZOOM
CUSTOM ZOOM becomes selectable when you set ZOOM
MODE to CUSTOM.
ZOOM:
You can expand the horizontal and vertical
sizes simultaneously.
H ZOOM: You can expand the horizontal size only.
V ZOOM: You can expand the vertical size only.
H POSITION: Pressing the PLUS (+) button moves the
image to the right. Pressing the MINUS (-)
button moves the image to the left.
V POSITION: Pressing the PLUS (+) button moves the
image up. Pressing the MINUS (-) button
moves the image down.

H RESOLUTION
* For the D-SUB inputs only.
Use this setting when AUTO SETUP and AUTO ADJUST
cannot obtain the horizontal resolution of the input signal.
Press the PLUS (+) button to increase the resolution. Press
the MINUS (-) button to decrease the resolution.

V RESOLUTION
* For the D-SUB inputs only.
Use this setting when AUTO SETUP and AUTO ADJUST
cannot obtain the vertical resolution of the input signal.
Press the PLUS (+) button to increase the resolution. Press
the MINUS (-) button to decrease the resolution.

SCREEN RESET
You can reset all the SCREEN settings to the factory
defaults.