Eizo FlexScan HD2442W - Manual (Page 8)

6
English
9 17
18
15
16
13 12 11 10
14
3 4 5 6 7 8 2
1
Setting menu
(ScreenManager
® * 1 )
Power connector
Troubleshooting Setting/Adjustment Installation Prior to use
Controls and Functions
1 Remote control
Use to set and adjust the monitor. (For the details, please read “Remote
Control Guide”.)
2 Remote control detector Receives the signal from the remote control.
3 Sensor Detects the environmental brightness. BrightRegulator function (see page
14).
4 Input Signal Selection Switch
(
) * 2
• Switches the signal input displayed on the monitor.
• When touching the switch for approx. seconds, a video display appears in
the PC display. When touching the switch again for approx. seconds, the
video display disappears and only PC display remains (single display).
PinP display function (Refer to “Remote Control Guide”).
5 Slide bar * 2 • Uses when the setting/adjustment is performed on each menu.
• When touching it while the menu is not displayed, the shortcut menu is
displayed. By touching the slide bar for 5 seconds, the content of the menu
changes (see page 7).
6 Menu switch ( ) * 2 Displays/Quits the Setting menu.
7 Power switch ( ) Turns the power on or off.
8 Power indicator Indicates monitor’s operation status.
Blue : The screen is displayed Orange : Power saving
Off : Power off
9 Security lock slot Complies with Kensington’s MicroSaver security system.
10 Audio output terminal
[Stereo mini jack] Connects the built-in amplifier speakers, etc.
11 Input signal connectors
(HDMI 1/2) [HDMI connector
× ] Connects AV equipment.
12 Input signal connector (PC 1) [DVI-D connector] Connects a PC.
13 Input signal connector (PC 2) [D-Sub mini 15-pin connector] Connects a PC.
14 USB ports (Up) [Upstream
× ] Connects a PC.
15 Headphone jack [Stereo mini jack] Connects headphones.
16 USB ports (Down) [Downstream
× ] Connects a peripheral USB device.
17 ArcSwing 2 Stand Used to adjust the height and angle of the monitor screen.
18 Cable holder Covers the monitor cables.
* 1 ScreenManager
®
is an EIZO’s nickname of the Setting menu.
For how to use ScreenManager, refer to the User’s Manual on the CD-ROM.
(In this manual, the setting/adjustment item names in the Setting menu are put in angle brackets < >. (ex. : ))
*
2 When touching while the power turns off, the monitor turns on.
Cabling