Eizo FlexScan HD2442W - Manual (Page 11)

9
English
Troubleshooting Setting/Adjustment Prior to use Installation
3. Connect the USB cable to the USB ports on the PC (downstream) and the monitor (upstream).
Be sure to connect to the USB port (upstream) that complies to the PC (PC 1/PC ).
• DVI-D connector (PC 1): PC 1 USB port is used.
• D-Sub mini 15-pin connector (PC ): PC USB port is used.
Connectors on the
PC
Downstream
Connectors on the
monitor
Upstream
USB cable MD-C93 (supplied)*
* When connecting two PCs to the
monitor, please purchase another cable.
Attention
• When connecting the monitor to a PC using a USB cable, the USB setting on the monitor should be
changed corresponding to the PC used (see page 1).
NOTE
• The monitor is equipped with the USB audio function. You may enjoy sound from PC with speakers by
connecting the USB cables.
3
Connects USB devices.
1. Connect USB devices (keyboard, mouse, etc.) to the USB port (downstream) on the monitor.
Attention
• After connecting the USB devices and turning on the monitor, the USB function is set up
automatically.
• This monitor may not work properly depending on the PC, OS or USB devices used. (For USB
compliance of the respective devices, consult their manufacturers.)
Connectors on the
monitor
Downstream
Keyboard
Mouse