Yamaha PSR-520 - Manual (Page 82)

81 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Appendix: Troubleshooting / Data Backup & Initialization
POSSIBLE CAUSE/SOLUTION PROBLEM
ACCOMP FREEZE function is turned ON. The reverb and chorus types are
memoried as accompaniment parameter. Press the [ACCOMP FREEZE] button
to turn OFF it. The reverb and chorus types can not
be changed by changing the registra-
tion memory number.
■ Data Initialization
........................................................................................................................................
All data can be initialized and restored to the factory preset condition by
turning ON the power while holding the [–/NO] and [+/YES] buttons. “CLr:
Backup” will appear briefly on the display.
• All registration, song and multi
pad memory data, plus the
other settings listed above, will
be erased and/or changed
when the data initialization
procedure is carried out.
• If the PSR-520 has been
“locked up” due to static elec-
tricity or other causes, turn the
PSR-520 OFF and execute the
initialize operation.
Except for the data listed below, all PSR-520 panel settings are reset to their
initial settings whenever the power is turned ON. The data listed below are
backed up — i.e. retained in memory — as long as an AC adaptor is connected
or a set of batteries is installed.
Backup CLr
–/NO + / YES 0
7 8 9
POWER
ON / OFF
Appendix: Data Backup & Initialization
Individual registration, song memory, or
multi pad data transmitted via bulk
dump from an external sequencer or
other device is not received by the
PSR-520.
Transmit the data with no more than a 2-second break between blocks, or trans-
mit as entirely separate data.
Make sure that an appropriate Yamaha Music Cartridge is properly plugged into
the cartridge slot (page 60)
The electrical contacts on the Music Cartridge are affected with dust. Insert and
remove the Music Cartridge several times. This may solve the problem. If the
problem still happens, wipe and clear the electrical contacts on the Music Car-
tridge with a dry soft cloth.
Cartridge data cannot be selected or
cannot be played back correctly.
• Registration Memory data
• User Song data
• User Pad Kit data
• Remote Channel
• Keyboard Out
• Song Out
• Accomp Out
• External Clock