Yamaha PSR-520 - Manual (Page 54)

53 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Recording
Play from a Specified Measure
You can start SONG playback from any specified measure, as long as the
specified measure is within the range of measures that has already been re-
corded:
1
Select the MEASURE Parameter
..................................................................................
While no recording or playback is in progress, use the CURSOR buttons
to select the MEASURE parameter in the display.
2
Enter the Desired Measure Number
......................................................................
Use the [–/NO] and [+/YES] buttons, the number buttons or the data dial
to enter the desired measure number.
• Three-digit numbers are entered
by first pressing and holding the
[1] or [2] button until “1” or “2”
appears in the hundreds position
on the display, then pressing the
remaining two digits in sequence.
MEASURE
a 01
CURSOR
3
Start Playback
..................................................................................................................................................
You can now start playback from the specified measure number.
–/NO + / YES
6 5 4
0
7 8 9
1 2 3
1– –
* *