beautypg.com

Overall functions, Remotech, Remote channel – Yamaha PSR-520 User Manual

Page 73

background image

72

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Remote Channel

..........................................................................................................................................

Sets the MIDI channel on which data from a remote keyboard will be

received. Any of the standard MIDI channels — 1 through 16 — can be
specified. The remote keyboard must be set up to transmit on the specified
remote channel, and the keyboard’s MIDI OUT connector must be con-
nected to the PSR-520 MIDI IN connector via a standard MIDI cable. Refer
to the “MIDI Implementation Chart” section (page 90) for technical details.
When set to OFF data is received on all 16 MIDI channels. The default set-
ting — OFF — can be recalled by pressing the [–/NO] and [+/YES] but-
tons simultaneously.

• Remote Channel is automatically

turned OFF when a MIDI “GM
ON” message is received.

• The Remote channel setting is

retained in memory even when
the power switch is turned OFF,
as long as batteries are installed
or an AC adaptor is connected.

The PSR-520 is capable of receiving the same MIDI data, so a second
MIDI keyboard connected to the PSR-520 MIDI IN connector can be
used to remotely play the PSR-520 and select voices as required.

RemoteCh

oFF

Overall Functions

MIDI Keyboard

MIDI OUT

MIDI IN

PSR-520

MIDI Sequence Recording

Although the PSR-520 features a built-in “sequencer” (the SONG re-
corder is a type of sequencer), the same type of musical information
transfer described above can be used for more sophisticated MIDI se-
quence recording using an external sequencer or music computer. A
MIDI sequence recorder or music computer can be used to “record”
MIDI data received from a PSR-520, for example. When the recorded
data is played back, the PSR-520 automatically “plays” the recorded
performance in precise detail.

• Never use MIDI cables longer

than about 15 meters. Cables
longer than this can pick up noise
which can cause data errors.

Music

Computer

MIDI IN

MIDI OUT

MIDI OUT

MIDI IN

PSR-520