Microlife BP 3BEO-4 - Manual (Page 8)

5
3. The various components of the blood-pressure monitor
The illustration shows the blood-pressure monitor, consisting of:
Wrist cuff Type WC1 13.5–19.5 cm, for wrist circumference of 13.5 to 19.5 cm
4. Putting the blood-pressure monitor into operation
4.1. Inserting the batteries
After you have unpacked your device, first insert the batteries. The battery compartment is
located on the left lateral side of the device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (2 x size AAA 1.5V), thereby observing the indicated polarity.
c) If the battery warning appears in the display, the batteries are empty and must be replaced
by new ones.
Attention!
•
After the battery warning appears, the device is blocked until the batteries have been replaced.
• Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumulators is not
recommended.
LCD Display
Time button
M-button (Memory)
START button
O/I button
Battery Cover
Wrist Cuff