Edimax Technology AR-7167WnB User Manual
Page 36

32
Beacon Interval
The interval of time that this wireless router broadcast a
beacon. Beacon is used to synchronize the wireless
network. The range for the beacon period is between 20
and 1000 with a typical value of 100 (milliseconds).
RTS/CTS Threshold
When the packet size is smaller than the RTS threshold,
the wireless router will not use the RTS/CTS mechanism
to send this packet. The range is from 1500 to 2347.
Fragmentation
Threshold
Fragment Threshold specifies the maximum size of
packet during the fragmentation of data to be transmitted.
If you set this value too low, it will result in bad
performance. Enter a value from 256 to 2346.
DTIM
Determines the interval the Access Point will send its
broadcast traffic. The range is from 1 to 255 and the
default value is 3 beacons.
Wireless Mode
802.11b
– It only allows 802.11b wireless network client
to connect this router (maximum transfer rate 11Mbps).
802.11g
– It only allows 802.11g wireless network client
to connect this router (maximum transfer rate 54Mbps).
802.11b+g
– It only allows 802.11b and 802.11g wireless
network client to connect this router (maximum transfer
rate 11Mbps for 802.11b clients, and maximum 54Mbps
for 802.11g clients).
802.11n
– It only allows 802.11n wireless network client
to connect this router (maximum transfer rate 150Mbps).
802.11g+n
– It allows 802.11g, and 802.11n wireless
network client to connect this router (maximum transfer